FUDforum
My FUDforum

Home »  » DeviceMaster RTS, Pro and Serial Hub » DeviceMaster RTS not taking config file; also PortVision config only displays Network tab (DeviceMaster RTS not taking config file)
DeviceMaster RTS not taking config file; also PortVision config only displays Network tab [message #1223] Fri, 01 May 2020 14:21
lrog is currently offline  lrog
Messages: 1
Registered: May 2020
Junior Member
We replaced a DeviceMaster RTS that was no longer working with a new one. We attempted to load the saved config file for the old one to the new one; it seemed to take it (no errors) but it did not change any settings. We also noticed when you look at the Portvision configuration page, the new DM only displays the "Network Settings" tab - Security, Email, RFC1006 and Port tabs do not show up. We have three other Devicemasters on this same network and those three appear normal. The difference between those three and the new one is they are running SocketServer 7.06 or 8.0 - the new one has 11.11. They are all RTS-32P. BTW, we can manually change the port and IP settings and they remain present after a reboot.
Previous Topic: what is wrong with serial tunneling
Next Topic: RTS on a Cisco network,
Goto Forum:
  


Current Time: Sun May 16 03:18:08 CDT 2021

Total time taken to generate the page: 0.00823 seconds