FUDforum
My FUDforum

Home »  » DeviceMaster RTS, Pro and Serial Hub » Network issue with RTS-16P (Duplex led off)
Network issue with RTS-16P [message #1140] Fri, 08 March 2019 11:14
alm38 is currently offline  alm38
Messages: 4
Registered: April 2018
Location: France
Junior Member
Hi,

We have received recently some DeviceMaster 16ports. With the "old" models we had, I had no network problems.
With the latest 16P, I noted that the Dynamic DNS registration disappears after some time. I tested with another DM 32 port which has no problem on the same switch.
I saw that the network duplex led on the RTS-16P stay off and with the RTS-32P the led is on (with test by switch cable form network switch or by test with cable between the DM and a laptop with port-vision).
I'm not sure that it was the reason of my problem but for the moment it's the only clue I have.
The 2 equipments are configured in DHCP and IP connect work, lease are renewed.
I did not find commands in the documentation for the duplex configuration.
If you have suggestions, they are welcome Razz


Some information for the 2 equipments ...

The DM RTS-16P (in error):
Bootloader v4.31
Model : RTS-16P(1E)
NS-Link 11.23
IP Addr: 0.0.0.0, Mask: 0.0.0.0, Gateway: 0.0.0.0
MAC Addr: 00:c0:4e:51:00:25

The DM RTS-32P (works fine)
Bootloader v4.06
Model : RTS-32P
NS-Link 11.23
IP Addr: 0.0.0.0, Mask: 0.0.0.0, Gateway: 0.0.0.0
MAC Addr: 00:c0:4e:12:26:0a

Merci,
Arnaud
Previous Topic: Disable Telnet on RTS 8 port
Next Topic: RTS-32 Web Page login failure
Goto Forum:
  


Current Time: Sun May 16 03:08:00 CDT 2021

Total time taken to generate the page: 0.00867 seconds