FUDforum
My FUDforum

Home »  » DeviceMaster RTS, Pro and Serial Hub » DeviceMaster Xon/Xoff issues
DeviceMaster Xon/Xoff issues [message #1072] Thu, 15 November 2018 08:04
Kurt is currently offline  Kurt
Messages: 288
Registered: July 2016
Location: Minnesota
Power User
We have noticed with the newer NXP 16 port and 32 port DeviceMasters, Xon/Xoff flow control may not work correctly with certain Applications.

We've found that the Xon/Xoff wasn't fully implemented in the FPGA code.

This issue is resolved starting with versions Bootloader-4.31 and SocketServer-11.30 firmware.

DeviceMasters with the NXP processor can be identified by the '03' in the serial numbber (xxxx-03xxxx)




Kurt Rees
www.comtrol.com
http://forum.comtrol.com/

Comtrol Corporation
100 Fifth Ave NW
Minneapolis, MN. 55112
Direct +1 763.957.6000 | +1 Fax (763) 957-6001
connect. communicate. control

[Updated on: Thu, 15 November 2018 08:05]

Report message to a moderator

Previous Topic: Spectre / Meltdown vulnerability
Next Topic: DeviceMaster Minimum Firmware Versions
Goto Forum:
  


Current Time: Sun May 16 03:30:58 CDT 2021

Total time taken to generate the page: 0.00668 seconds